B2B Fleet Solutions · Since 2003

Electric Passenger Fleet Vehicles That Earn More Per Trip

Every kilometre a petrol passenger vehicle burns, it burns your driver’s margin. BENLG electric motorcycles, scooters and tuk-tuks are built for the three realities of commercial passenger work: long daily hours, two-up loads and rough roads. One factory supplies the vehicles, batteries and energy infrastructure — with field-verified operating data, not lab estimates.

20+Years manufacturing
66,000 m²Dongguan Factory
65+Countries served
ISO 9001Certified
BENLG electric passenger fleet vehicles

Three Reasons Fleet Operators Switch

Not a personal e-bike with a fleet sticker. These are commercial platforms built for the economics of passenger transport.

💰

Lower Cost Per Kilometre

At typical fleet operating parameters, energy cost per kilometre drops 92%. No engine oil, no exhaust service, no spark plugs — fewer moving parts means fewer days in the workshop and more days earning.

🛡️

Built for Two-Up Daily Work

Reinforced frames, dual-rate rear suspension and passenger-rated seats. These are commercial platforms designed for 80+ km days with a passenger aboard — not light-duty personal vehicles repurposed for fleet use.

⚡

Energy Infrastructure Included

Removable batteries, swapping cabinets and depot charging — plus solar and storage where the grid is unreliable. We help you design the energy system that keeps your fleet on the road, not waiting to charge.

The Real Cost of a Passenger Fleet

The figures below match the calculator’s default parameters — a 50-vehicle fleet running 85 km/day, 26 days/month. Adjust every input in the calculator to match your market’s fuel prices, electricity rates and road conditions.

Cost factorPetrol fleetElectric fleet
Energy cost / kmUS$0.0455US$0.0036
Energy cost reductionBaseline−92.1%
Routine maintenanceEngine oil, exhaust, plugs & chainLower-frequency motor & battery care
Daily downtimeService + refuelling stopsOvernight charge / battery swap
US$0.0455 → 0.0036
Energy cost per kilometre
~85.5 km
Average daily distance per vehicle (calculator default)
~US$5,380 / mo
Illustrative saving for a 50-motorcycle fleet (calculator defaults)

Illustrative figures based on the calculator’s default parameters (50 vehicles, 85 km/day, 26 days/month, petrol $1.30/L at 3.5 L/100km, electricity $0.12/kWh at 3.0 kWh/100km). Adjust every input in the calculator below to match your market. Actual results vary with local fuel and electricity prices, route conditions, passenger loads and charging losses.

Compare Your Petrol vs Electric Fleet Costs

Enter your real operations to estimate energy, maintenance and downtime savings. Adjust every field to match your market.

Energy Costs
Maintenance & Downtime — estimated $ per vehicle / month
Monthly Savings
$0
Annual Savings
$0
Cost Reduction
0%
5-Year Savings
$0
Cost Item
Petrol
BENLG Electric
Fuel / Energy
$0
$0
Maintenance & Parts
$0
$0
Downtime / Lost Shifts
$0
$0
Total Operating Cost
$0
$0
Where Your Fleet Saves
Fuel / energy savings: $0
Maintenance savings: $0
Downtime savings: $0
Total monthly savings: $0
Operating cost per km: Petrol $0 vs BENLG Electric $0  ·  Monthly fleet distance: 0 km
View assumptions & method
Monthly fleet distance = Fleet Size × Average Distance / Vehicle / Day × Operating Days.
Fuel / Energy Cost = Monthly Distance × (Consumption per 100 km ÷ 100) × Energy Price. For example: 110,500 km × (3.5 L/100 km ÷ 100) × $1.30/L = $5,028. Maintenance and downtime are entered per vehicle / month and applied across the fleet.
Total Operating Cost = Energy + Maintenance + Downtime. The model excludes purchase price, financing, charging infrastructure, battery replacement and resale value — it is a planning estimate; actual results vary by specification, conditions and local prices.
Get a Custom Fleet Quote →

The Right Vehicle for Every Passenger Route

Passenger transport is not one business. Boda-boda riders, urban two-up taxis and tuk-tuk shuttle operators each need a platform matched to their routes, loads and local regulation.

BENLG BOX electric motorcycle for boda-boda
Electric Motorcycle · 3000W · Two-up

BOX — Boda-Boda Workhorse

The workhorse of African motorcycle taxi networks. The BOX pairs a 3000W mid-drive motor with dual swappable 72V30Ah batteries — up to 150 km of daily range. Reinforced rear frame, long-travel suspension and dual-passenger seat built for 80+ km days.

Best for: Boda-boda, motorcycle taxi, suburban and rural routes
BENLG RIVO electric scooter for urban taxi
Electric Scooter · 2000W · LiFePO4

RIVO — Urban Two-Up Taxi

Step-through comfort for city passenger work. The RIVO pairs a 2000W hub motor with a 72V40Ah LiFePO4 battery — 90 km range, smooth low-speed handling and weather-protected bodywork. Dual passenger seat with grab rail and foot pegs.

Best for: Urban taxi, app-based ride-hailing, city shuttles
BENLG DUDU passenger electric tricycle tuk-tuk
Passenger Tricycle · 2-Row & 3-Row

DUDU — Tuk-Tuk Shuttle

Higher-capacity passenger transport for short-haul and semi-fixed routes. DUDU is available in two-row (4 adults) and three-row (6 adults) configurations. Optional rear independent suspension — instead of a solid axle — delivers a noticeably smoother ride that passengers will pay a small premium for.

Best for: Tuk-tuk taxi, station shuttle, last-mile shared transport

Contact us for pricing, configurations and container loading plans.

Passengers Notice the Difference — and Come Back

In a competitive taxi market, repeat passengers are the difference between a good month and a slow one.

  • ✓
    Quiet and smooth. No engine vibration, no exhaust noise, no fumes. Passengers can talk normally during the ride.
  • ✓
    Clean boarding. No oil smells or hot exhaust near the passenger seat.
  • ✓
    Smooth pull-away. Electric torque delivers instant, linear acceleration without gear-jerking.
  • ✓
    Comfortable suspension. Dual-rate rear springs and optional independent rear suspension on DUDU handle rough urban surfaces without the harshness of a solid axle.
  • ✓
    Modern image. An electric vehicle signals a professional, up-to-date service that supports higher daily rates in many markets.
Passenger riding comfortably in electric tuk-tuk

More Than Vehicles — A Fleet Deployment Partner

Electrifying a passenger fleet is not just a vehicle purchase. We support the whole project so you can deploy with one accountable partner.

Vehicle Selection

Platforms matched to your routes, passenger loads, daily mileage and local regulation.

OEM & ODM

Fleet colours, branding, seating configuration, speed limits and equipment.

Charging & Swapping

Depot charging layout, removable batteries, swapping cabinets sized to your fleet.

Solar & Storage

Solar panels and battery storage for depots with unreliable or expensive grid power.

After-Sales

Technical documentation, spare-parts packages, mechanic training and remote support.

From First Assessment to Full Fleet

A clear five-stage process from initial conversation to scaled deployment.

01

Assess

Fleet size, daily mileage, passenger capacity, road conditions, current fuel costs.

02

Configure

Vehicle platform, battery chemistry, seating, branding and supply mode (CBU/SKD/CKD).

03

Plan Energy

Depot charging, battery swapping, solar and storage — sized to daily utilisation.

04

Pilot

A small pilot batch tested on real routes: range, uptime, TCO, passenger acceptance.

05

Scale

Full deployment with container shipping, spare-parts packages and local training.

Frequently Asked Questions

Can BENLG supply electric vehicles for commercial passenger fleets?
Yes. BENLG supplies electric motorcycles, electric scooters, and electric passenger tricycles for B2B commercial applications, including motorcycle taxis, boda-boda fleets, urban two-up transport, passenger shuttles, and tuk-tuk operations. We work with fleet operators, importers, distributors, and other commercial partners to select suitable vehicle platforms and configurations based on passenger capacity, daily mileage, road conditions, operating requirements, and target market.
How many passengers can your electric tricycles carry?
BENLG passenger tricycles are available with different passenger-compartment configurations, including two-row and three-row versions. Each row is designed to accommodate two adults comfortably. A three-row configuration provides comfortable seating for up to six adults, while a two-row configuration provides comfortable seating for up to four adults. The final approved passenger capacity should be confirmed according to the specific vehicle configuration and regulations of the destination market.
Can you customize the vehicles for our market?
Yes. BENLG offers OEM and ODM customization for qualified B2B projects. Depending on the vehicle and project requirements, customization may include colors and branding, seating configuration, battery configuration, electrical components, passenger equipment, speed limits and other vehicle specifications. Options depend on the selected model, order volume, target market, and technical requirements.
Can BENLG supply battery-swapping cabinets?
Yes. BENLG can supply battery-swapping cabinets for fleet and commercial applications where battery swapping is appropriate for the selected vehicle and battery configuration. Swapping can reduce vehicle downtime in high-utilization operations. The appropriate cabinet, battery configuration, and swapping solution should be confirmed based on the vehicle model and fleet requirements.
Can you provide solar panels and energy storage systems?
Yes. In addition to electric vehicles and battery-swapping equipment, BENLG can supply solar panels and energy storage systems for customers developing their own fleet energy infrastructure. The appropriate system configuration depends on the fleet size, daily energy demand, local solar conditions, electricity supply, and project requirements.
Do you offer CKD and SKD supply?
Yes. BENLG can supply vehicles in CBU, SKD, and CKD formats, as well as provide OEM/ODM solutions for qualified B2B projects. CBU suits customers looking for ready-to-deploy vehicles, while SKD and CKD provide flexibility for local assembly and localization. The right supply model depends on import duties, local assembly capabilities, regulations, order volume, and the customer’s business model.
Can you provide technical support after delivery?
Yes. BENLG provides after-sales support for B2B customers, including technical documentation, spare-parts support, troubleshooting assistance, and product-related technical consultation. For projects requiring more extensive engineering involvement, paid technical support services are also available.
What information do you need to recommend a fleet configuration?
To recommend a suitable vehicle and configuration, we typically need information about your target market, fleet size, primary application, passenger capacity, average daily mileage, road conditions, operating hours, and current vehicle type. It also helps to know your preferred battery technology, charging conditions, whether battery swapping is being considered, and whether you require CBU, SKD, CKD, or OEM/ODM supply. You do not need to have every specification decided before contacting us.

Ready to Run the Numbers for Your Fleet?

Tell us your fleet size, daily mileage, target market and vehicle type. We’ll recommend a platform and energy configuration, share a container loading plan and send a factory-direct quote — within one business day.

Get a Fleet Quote →
Scroll to Top